APC Smart-UPS SRT 19 INCH Rail Kit for Smart-UPS

High density, double-conversion on-line power protection with scalable runtime. The iBusway for Data Center solution uses bolted snap-fit hangers and plug-in joint connections, which simplify installation and eliminate the need for expensive special tools.

Key Product Info

• Automatic internal bypass
• Scalable runtime
• Intelligent battery management
• Hot-swappable batteries
• Automatic restart of loads after UPS shutdown
• Temperature-compensated battery charging
• Network manageable
• InfraStruXure Manager compatible
• SmartSlot
• LED status indicators
• Serial connectivity
• Plug-and-Play external batteries
• Rack/Tower convertible
• Flash upgradeable firmware
• User-replaceable batteries
• Automatic self-test
• Disconnected battery notification
• Audible alarms
• Frequency and voltage regulation
• Power conditioning
• Input power factor correction
• Generator compatible
• Cold-start capable
• Resettable circuit breaker
• Safety-agency approved

Product Features

• Automatic internal bypass
  Supplies utility power to the connected loads in the event of a UPS power overload or fault.
• Scalable runtime
  Allows additional run time to be quickly added as needed.
• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
• Automatic restart of loads after UPS shutdown
  Automatically starts up the connected equipment upon the return of utility power.
• Temperature-compensated battery charging
  Prolongs battery life by regulating the charge voltage according to battery temperature.
• Network manageable
  Provides remote power management of the UPS over the network.
• InfraStruXure Manager compatible
  Enables centralized management via the APC InfraStruXure Manager.
• SmartSlot
  Customize UPS capabilities with management cards.
• LED status indicators
  Quickly understand unit and power status with visual indicators.
• Serial connectivity
  Provides management of the UPS via a serial port.
• Plug-and-Play external batteries
  Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
• Rack/Tower convertible
  Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
• Flash upgradeable firmware
  Install maintenance releases of firmware remotely using FTP.
• User-replaceable batteries
  Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).
• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement.
• Disconnected battery notification
  Warns when a battery is not available to provide backup power.
• Audible alarms
  Provides notification of changing utility power and UPS power conditions.
• Frequency and voltage regulation
  Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
• Power conditioning
  Protects connected loads from surges, spikes, lightning, and other power disturbances.
• Input power factor correction
  Minimizes installation costs by enabling the use of smaller generators and cabling.
• Generator compatible
  Ensures clean, uninterrupted power to protected equipment when generator power is used.
• Cold-start capable
  Provides temporary battery power when the utility power is out.
• Resettable circuit breaker
  Easy recovery from overloads; no need to replace a fuse.
• Safety-agency approved
  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

What's in the box?

• Installation guide
• Mounting hardware