Smeg ST323PM Semi-Professional Integrated Dishwasher - 14 Place Settings, 600mm Wide, 5.45kW Multiphase

The Smeg ST323PM is a semi-professional integrated dishwasher for small cafes, office staff rooms and guest houses with lower volumes. It washes 14 place settings per cycle across nine programmes, and the 16-minute Professional rapid cycle gives about 3 cycles, or approx 42 plates, per hour.

Installation and Connection

Hardwired, needs connecting by a qualified electrician. The 5.45kW multiphase supply is set for 3-phase as standard and can be configured by a qualified engineer for 13A, 20A or 32A single phase; 32A set-ups need hardwiring to a suitable isolator. It takes a cold or hot fill, has a fitted drain pump and Total Aquastop leak detection, and fits under a counter at 818mm high and 598mm wide. Your own furniture door is required, and a fixing kit is included.

Day-to-Day Use and Cleaning

Programmes are Soak, 60 Minutes, Eco, Auto, Mix, Intense, Hygiene, Rapid and Crystal, set from an electronic panel with a 3-digit LED display. FlexiZone half load cuts water and energy on lighter loads, and Dry Assist opens the door after the cycle. An integrated water softener, self-clean function and self-diagnosis fault warnings support daily running. It uses 10.5L of water per cycle and is rated at 42 dB(A).

FAQs

Does it need hardwiring?
It is supplied for 3-phase and must be connected by a qualified electrician. It can be configured for 13A, 20A or 32A single phase, with 32A hardwired to an isolator.

How many plates per hour?
Approx 42 plates per hour, based on 14 place settings and about 3 cycles per hour on the 16-minute rapid cycle.

What warranty does it have?
It comes with a 2 Year Warranty.