Heater 2.7kw J335, J345, J355, J365,J375,J385 2016+

All about me

A genuine Jacuzzi 230V 2.7kW heater for J100, J200 and J300 hot tubs that use a pressure switch. It is the 15 inch (381mm) straight-through heater and comes with its nuts and gaskets, so it fits straight back in place of the old one.

It also replaces the older 6000-157 heater used on J200 tubs without a circulation pump.

Fits these hot tubs

• J300: J335, J345, J355, J365, J375 and J385 made from 2016 to 12 February 2020 (pressure switch models)
• J200: J210, J215, J220, J225, J230, J235, J245, J270, J275 and J280 made from 2005 to 12 October 2020, without a circulation pump (pressure switch models)
• J100: J115, J125, J135 and J145 made from 2016 to 12 October 2020 (pressure switch models)

Check before you order

• Jacuzzi moved these tubs from a pressure switch to a flow switch on 12 February 2020 (J300) and 12 October 2020 (J100 and J200). The build date is on the label inside the cabinet, and the part number is on the label of your old heater.
• Tubs made after the change to a flow switch use the 6500-069 heater. This heater can be fitted to a flow switch tub with a 6000-124 plug in the pressure switch port, so ask us if you are unsure.
• This is the UK and European (export 50Hz) version. North American 60Hz tubs use a different heater.

Good to know

• 230V, 2.7kW, 50Hz
• 15 inch (381mm) long
• Nuts and gaskets included
• Replaces part 6000-157
• Union gaskets (6000-287) and the high limit disc fuse (6000-093) are also sold separately if yours are worn