Refurbished CDA ECP102SS 100cm Curved Glass Chimney Cooker Hood Stainless Steel

The ECP102SS is a 100cm wide chimney hood in stainless steel with a curved glass canopy from CDA.

This model has 3 speeds selected by push button controls and aluminium grease filters. There are two 20 Watt halogen lights to illuminate your hob. The motor gives you a good extraction rate of 391 cubic metres per hour, which is ideal for kitchens up to 47 cubic metres, and a relatively low noise level at 60 decibels.

As a wall-mounted extractor the ECP102SS can be installed to re-circulate the air into the kitchen or to be ducted outside. If you are choosing to re-circulate you'll need a charcoal filter and if you're ducting out you'll need a ducting kit.

Features

• Ducted or recirculating modes
• 3 speeds
• Push button control
• Aluminium grease filter
• 2 x 20 W halogen lights

Technical Specifications

• Required height over gas hob: 700 mm (min)
• Required height over electric hob: 600 mm (min)
• Outlet diameter: 150 mm
• Noise level: 61 dBA
• Extraction rate: 391 m³/hr
• Rated electrical power: 200 W
• Power supply required: 3 amps

Fitting note: Please ensure that you check the ceiling height is sufficient to allow the required clearance between the hob and extractor