Midea Comfee 12000 BTU Smart A++ Wall Mounted Split Air Conditioner with Heat Pump

The Comfee 12,000 BTU is a smart, Wi‑Fi–enabled inverter wall split built for genuine year‑round use. An inverter rotary compressor pairs A++ cooling efficiency with heat‑pump warming for the colder months, while built‑in Wi‑Fi and app control put the whole system on your phone. Backed by the advanced engineering of the Midea Group – one of the world’s largest appliance manufacturers – it’s a well‑specified fixed split air conditioner. Suitable for rooms of roughly up to 35 m², subject to insulation, glazing and orientation.

Why buy me

• 12,000 BTU cooling + heat pump – A++ rated cooling for warm spells and efficient heat‑pump warming in winter, so one unit works all year in larger rooms.
• Wi‑Fi & app control built in – adjust temperature, mode and schedules from your smartphone, at home or away; works with voice assistants via the Midea/Comfee app ecosystem.
• Low‑energy inverter – the DC inverter compressor modulates output continuously instead of cycling on/off, holding temperature while trimming running costs (A++ cooling / A+ heating).
• Quiet in the room – from just 25 dB(A) indoor on the lowest setting, so it stays in the background while you sleep or work.
• Dehumidifier & fan modes – removes up to 1.2 l/h of excess moisture (helping reduce damp, mould and mildew) and runs as a standalone fan when you don’t need cooling.
• Flexible installation – long pipe run (up to 25 m) and up to 10 m height difference between units give installers real freedom on placement.
• Smart self‑care features – smart diagnosis, eco mode and refrigerant leak detection across the Comfee range help protect the unit and simplify servicing.
• Backed by Midea – dependable spares and service through a global manufacturer.

The details

Year‑round comfort from one system. The inverter compressor delivers fast, stable cooling when it’s hot and switches to efficient heat‑pump warming when it’s cold – holding your set temperature rather than swinging above and below it. Rated cooling is 3.5 kW (12,000 BTU), rising to around 3.9 kW on demand, with heat‑pump heating up to roughly 4.2 kW.

Efficiency that shows on the bill. Rated A++ in cooling and A+ in heating (EER 3.23 / COP 3.76 to EN 14511), the unit uses inverter control to match output to demand. Because it ramps down once the room is at temperature – instead of stopping and restarting at full power – it avoids the energy spikes of older on/off units.

Control from anywhere. Built‑in Wi‑Fi connects the unit to the Comfee/Midea app so you can set schedules, change modes and check status from your phone – handy for pre‑cooling before you get home or making sure it’s off after you’ve left.

Cleaner, more comfortable air. A dedicated dehumidification mode pulls excess moisture out of the room (rated around 1.2 l/h), helping with that heavy, humid feeling on muggy days and reducing the conditions that let mould and mildew form. A fan‑only mode keeps air moving when cooling isn’t needed.

Installer‑friendly pipework. With a maximum pipe run of 25 m and up to 10 m of height difference between indoor and outdoor units, this unit gives installers latitude on where the condenser sits – useful on flats, awkward elevations and longer runs. Connections are 1/4" (6.35 mm) liquid and 3/8" (9.52 mm) gas.

Compact indoor unit. The wall unit measures 715 × 285 × 194 mm (W×H×D) and weighs 7.3 kg, sitting discreetly above a door or window. The outdoor condenser is 720 × 495 × 270 mm and 21 kg – the same footprint as the Midea 9,000 BTU model.

Essential info

• Power supply: 220–240 V ~ 50 Hz, 1 Ph
• Indoor dimensions (W×H×D): 805 × 285 × 194 mm
• Indoor net weight: 7.3 kg
• Outdoor dimensions (W×H×D): 720 × 495 × 270 mm
• Outdoor net weight: 21 kg
• Colour: White

Specification

• Cooling capacity (nominal): 3.22 kW
• Cooling capacity (min–max): 1.11 – 3.93 kW
• Heating capacity (nominal): 3.31 kW
• Heating capacity (min–max): 1.08 – 4.16 kW
• Energy class (cool / heat): A++ / A+
• SEER (cooling): 7.1
• SCOP (heating, average climate): 4.0
• EER / COP (nominal, EN 14511): 3.23 / 3.76
• Pdesign (cool / heat): 3.2 kW / 2.8 kW
• Annual energy (cool / heat): 160 kWh / 957 kWh
• Refrigerant / GWP: R32 / 675
• Factory pre-charge: 0.52 kg
• CO₂ equivalent: 0.35 t
• Dehumidification: ~1.2 l/h
• Compressor: Rotary DC inverter
• Indoor airflow (min–med–max): 310 / 430 / 530 m³/h
• Outdoor airflow: 1,750 m³/h
• Indoor sound pressure (min–med–max): 25 / 35.5 / 39.5 dB(A)
• Indoor sound power: 55 dB(A)
• Outdoor sound pressure (max): 55 dB(A)
• Outdoor sound power (max): 63 dB(A)
• Pipe — liquid / gas: 6.35 mm (1/4") / 9.52 mm (3/8")
• Max pipe run / max elevation: 25 m / 10 m
• Refrigerant charge increment: 12 g/m
• Operating range (indoor — cool / heat): +17 to +32 °C / 0 to +30 °C
• Operating range (outdoor — cool / heat): −15 to +50 °C / −20 to +30 °C
• Power supply: 220–240 V ~ 50 Hz, 1 Ph
• Max power input / current: 2,150 W / 10 A
• Remote control: Included
• Smart / connectivity: Wi‑Fi built-in, app control, smart diagnosis, eco mode, leak detection
• Colour: White

Downloads

User Manual »